Product ID:BEAUTYWELD, ARC WELDING ELECTRODE
MSDS Date:03/31/1993
FSC:3439
NIIN:00-127-2611
MSDS Number: CDZSZ

EUTECTIC CORP

40-40 172ND STREET
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

POTASSIUM HYDROXIDE (CERCLA)

CAS: 1310-58-3

RTECS: TT2100000

OSHA PEL C 2 MG/M3

ACGIH TLV: C 2 MG/M3

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

POTASSIUM SILICATE

CAS: 1312-76-1

OSHA PEL N/K

ACGIH TLV: N/K

CLAY (KAOLIN); (KAOLIN)

CAS: 1332-58-7

RTECS: GF1670500

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

FELDSPAR

CAS: 68476-25-5

OSHA PEL N/K

ACGIH TLV: N/K

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1-5%

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST

CELLULOSE

CAS: 9004-34-6

RTECS: FJ5691460

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3

WELDING, HEATING, BRAZING, SOLDERING/CUTTING

RTECS: 9999999ZZ

INCL CHILLS, FEVER, HEAD & MUSC ACHE, TIGHTNESS OF

RTECS: 9999999ZZ

VOMIT. SYMPS USUALLY OCCUR W/IN SEVERAL HRS AFTER

RTECS: 9999999ZZ

NUISANCE DUSTS ARE INERT, NON-TOX & CHEM NON-IRRIT.

RTECS: 9999999ZZ

CONT CAN PRDCE PARTICULATE IRRIT. DOES NOT SEEM TO

RTECS: 9999999ZZ

PRDCE MILD PULM IRRIT & POSS NON-DISABLING SLIGHT

RTECS: 9999999ZZ

TRACT IF INHALED. LONG TERM OVEREXP MAY CAUSE

RTECS: 9999999ZZ

MAY

RTECS: 9999999ZZ

VOMIT, IRRIT OF THROAT & ACHING OF BODY. EXCESS

RTECS: 9999999ZZ

TREMORS. BEHAVIORAL CHANGES & CHANGES IN

RTECS: 9999999ZZ

CMPDS SHOULD RECEIVE QUARTERLY MED EXAMINATIONS FOR

RTECS: 9999999ZZ

ELEC SHOCK, INCL WELDER'S GLOVES & PROT

RTECS: 9999999ZZ

CMPDS, METAL OXIDES, CARBON & SILICA.

RTECS: 9999999ZZ

DIOXIDE, NITROGEN OXIDES & CERTAIN INERT GASES USED

RTECS: 9999999ZZ

COMPOSITION & QTY OF FUMES & GASES TO WHICH WORKERS

RTECS: 9999999ZZ

HELMET IF WORN/IN WELDER'S BRTHG ZONE. FOR MORE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: FUMES ASSOC W/HEATING,
WELDING, BRAZING, SOLDERING/CUTTING METALS CAN BE DANGEROUS TO YOUR
HLTH & OVEREXP CAN CAUSE LUNG DMG &/OTHER ORGAN DMG. EYE/SKIN: ARC
RAYS & ULTRAVIOLET LIGHT CAN INJURE EYES & BURN SKIN. LIQS USED IN
FLUXES & CHEM AIDS MAY CAUSE IRRIT/POSS CHEM BURNS. ELEC SHOCK
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CAN KILL. INGEST: DANGER! MAY BE
HARMFUL/FATAL IF SWALLOWED. GEN WELDING FUMES: ELEC ARC WELDING,
BRAZING, SOLDERING/THERMAL SPRAYING MAY CREATE ONE/MORE OF THE
FOLLOWING HLTH HAZS ASSOC W/K EY INGS. FUMES, GASES & DUSTS CAN BE
DANGEROUS TO YOUR HLTH. CERTAIN MED STUDIES HAVE SUGGESTED THAT
LUNG DMG (SUP DAT)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHALATION: MOVE TO FRESH AIR SOURCE. CONTACT MD & ADVISE MD
OF INGS. SKIN: THOROUGHLY WASH HANDS/AFFECTED AREAS W/SOAP & WATER
TO REMOVE ALL RESIDUE. IF RASH/BURN DEVELOPS, CONSULT MD. EYE:
THORO FLU SH W/WATER FOR AT LEAST 15 MIN TO REMOVE ALL RESIDUE.
OBTAIN PROMPT MED ADVISE FOR FLUXES & CHEM AIDS. ADVISE MD OF INGS
INGEST: CALL MD AND/LOC POISON CONTROL CENTER. ADVISE OF
INGREDIENTS.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . TOXIC FUMES MAY BE PRODUCED.
Unusual Fire/Explosion Hazard:SOME FLUXES & CHEMS AIDS MAY GIVE OFF
HYDROGEN CHLORIDE, PHOSGENE & CHLORINE GAS. CANS, UNDER PRESS &
FLAMMS, MAY EXPLODE. FOR MORE INFO CONT NEHC .

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PLEASE READ & UNDERSTAND PROD LBL FOR
PROPER PROC & USE. TRAIN WORKERS NOT TO TOUCH LIVE ELEC PARTS & TO
INSULATE THEMSELVES FROM WORK & ELEC GROUND.
Other Precautions:TRAIN WELDER TO KEEP HIS/HER FACE AWAY FROM FUME/DUST
PLUME. SEE ANSI Z49.1 "SAFETY IN WELDING & CUTTING" & CHAPTER 11 OF
"THERMAL SPRAYING" PUBLISHED BY AMERICAN WELDING SOCIETY AND OSHA
PUBLICATION 2206 (29 CFR 1910) FOR MORE DETAIL.

Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
TO EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW THE RECOMMENDED
EXPOSURE LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
FUMES & DUST FROM WORKER'S BREATHING ZONE & GEN AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR HAND, HEAD & BODY PROT TO PVNT INJURY FROM RADIA, SPKS & (ING
20)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: CAN RSLT FROM OVEREXP TO THESE FUMES. SHORT TERM
OVEREXP MAY RSLT IN DIZZ, NAUS/DRYNESS/IRRIT OF NOSE, THROAT/EYES.
EXCESS OVEREXP MAY CAUSE BRONCH ASTHMA, LUNG FIBROSIS, PNEUMOCONIOS
IS/SIDEROSIS (IRON DEPOSITS IN LUNG). METAL FUME FEVER: CAN BE
CAUSED BY INHAL OF CERTAIN METALLIC CMPDS DURING (ING 9)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:REAS EXPECTED CONSTITUENTS OF FUME MAY
INCL: COMPLEX OXIDES OF METALS IN INGS; FLUX COATINGS MAY PRDCE
FLUORIDE (ING 21)

Waste Disposal Methods:DISP OF WASTE MATL, POWDERS, GRINDING/FILTER
RESIDUES IN ENVIRON SENSITIVE MANNER I/A/W FED, STATE & LOC REGS.
USE APPROP MEASURES TO KEEP AIRBORNE DUST LEVELS CONTAINED I/A/W
EXPOS LEVELS OF INGS SEC TION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.